Available Prints

Every print is made to order on archival paper — shot, edited, and released personally.

This is the full collection of fine art aerial prints of Melbourne and Victoria — 5 images, each shot personally by drone over Melbourne CBD, Albert Park, Melbourne and Southbank, Melbourne, then printed to order on archival cotton rag paper and shipped free anywhere in Australia.

What's in the collection

Every image here is a Melbourne or Victorian subject photographed from the air, most of them from around 400 feet — the top of the standard altitude ceiling for this kind of flight. The collection runs from the copper dome on top of 333 Collins Street, invisible from the footpath below, to the Grand Prix circuit ringing Albert Park Lake at sunset, the Arts Centre spire looked down on from 250 feet, hot air balloons over the CBD at sunrise, and the city grid at twilight.

The common thread is geometry that only resolves from directly above: structures thousands of people walk past daily without seeing. Nothing here is a stock skyline. Each image is shot, edited and released personally, and several took multiple seasons of failed attempts before a frame worked — Melbourne from above covers what the city looks like from that altitude in more detail.

How the prints are produced

Every print is a giclée made to order on Hahnemühle Photo Rag 308gsm — pigment inks on 100% cotton rag paper, produced individually once ordered rather than pulled from warehouse stock. Each one is checked against the current printer profile before it ships. Production happens in Melbourne, and prints travel rolled in acid-free tissue inside heavy-duty crush-resistant tubes.

Allow 5 to 7 business days for printing and quality control, then 2 to 4 business days to Australian metropolitan areas and up to 7 to regional and remote areas. Shipping within Australia is free and tracked; orders currently ship within Australia only. The full production process is documented in the journal, and the shipping policy has the delivery detail.

Sizes and framing

Prints are sold in standard A-series sizes, from A4 up to A0 (). Most images are offered across the full range; the Arts Centre print runs A3, A2 and A0. Viewing distance decides the size rather than wall size — a print wants to be seen from about 1.5 to 2 times its diagonal, so a sofa three metres back points at A0 while a hallway viewed from a metre and a half wants A2 or A1.

Framing adds to every one of these dimensions: a matted, framed A1 becomes roughly 80 × 105cm on the wall, so compare framed sizes against your space rather than paper sizes. The print size guide works the choice backwards from your room, and the framing guide covers frame colour, matting and placement.

Terms used on this page

Giclée print
A giclée print is a print made with pigment-based inks rather than dyes, laid down by a large-format printer at high resolution. Pigment inks sit in the paper instead of soaking through it and are rated for well over a century of colourfastness, which is the difference between a fine art print and a poster-shop print that fades visibly in years.
Hahnemühle Photo Rag 308gsm
Hahnemühle Photo Rag 308gsm is a 100% cotton rag paper from a German mill that has made paper since 1584. It is matte, heavy and slightly textured, which lets dark tones sit flat and quiet rather than turning the surface into a mirror — the reason it suits city-at-dusk images, which live or die on their shadows.
Made to order
A made-to-order print is produced individually once it is ordered — printed, proofed and shipped as a one-off run rather than pulled from warehouse stock. Every print in this collection is made this way and checked against the current printer profile before it ships. They are open prints, not numbered limited editions.
A4
A4 is 210 × 297mm (21 × 29.7cm), about the size of a magazine page. It suits a picture ledge, a desk, or a cluster of several prints hung together. It is one step on the ISO 216 A-series, where each size is half the area of the one above it.
A3
A3 is 297 × 420mm (29.7 × 42cm). Like A4 it works at close range and in groups, and it is the low-risk way to live with an image before committing to it at scale.
A2
A2 is 420 × 594mm (42 × 59.4cm), roughly a movie poster, with a 73cm diagonal. It is the most flexible size on a wall: corridors, home offices, and the wall at the foot of a bed.
A1
A1 is 594 × 841mm (59.4 × 84.1cm), with a 103cm diagonal. It is the size recommended most often for living rooms: above a sofa, sideboard or bed it anchors the wall without dominating the room.
A0
A0 is 841 × 1189mm (84.1 × 118.9cm), the largest standard A-series size, with a 146cm diagonal. It is a genuine large-format print that wants a dedicated wall and two to three metres of viewing distance.

Common questions

What paper are the prints printed on?

Hahnemühle Photo Rag 308gsm, a 100% cotton rag paper, printed giclée with pigment inks rated for well over a century of colourfastness. It is matte and slightly textured, which suits city-at-dusk images because dark tones sit flat rather than turning the surface into a mirror. The production process is documented in full.

How long does delivery take in Australia?

Allow 5 to 7 business days for printing and quality control before dispatch, then 2 to 4 business days to metropolitan areas and up to 7 to regional and remote areas. Shipping is free on all Australian orders and every parcel is tracked. Prints ship rolled in acid-free tissue inside a crush-resistant tube.

Do the prints come framed?

No. Prints are supplied unframed and rolled, which is how large-format fine art paper travels safely and lets you match the frame to your room. Any custom framer can work from a standard A-size. The framing guide covers frame colour, mat borders and placement.

Are these limited edition prints?

No. They are open prints, made to order rather than numbered in a limited run. Each one is produced individually when it is ordered and checked against the current printer profile before it ships, so nothing sits in a warehouse fading.

What size print should I buy?

Work backwards from viewing distance rather than from the wall. A1, at 59.4 × 84.1cm, is the size recommended most often for living rooms. A0 wants a dedicated wall and two to three metres of viewing distance. Framing adds to all of these, so compare framed dimensions against your space. The print size guide works through it properly.

Do you ship outside Australia?

Not currently — shipping is within Australia only. If you are overseas and want a print, get in touch and I will tell you honestly whether it is workable rather than taking an order I cannot fulfil.

New Releases

Stay notified when new prints drop

Follow on Instagram for first access to new releases and behind-the-scenes content.

Follow on Instagram